Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
OEM Barcode Scanner
Embedded programmable barcode scanner module that can be controlled by the host computer or MCU board of device through sending correct commands via serial port interface.
It has great advantages in scanning speed, scanning angle, scanning range, recognition of fuzzy barcodes, reflective barcodes, etc., whether it is a paper barcode or an electronic screen barcode, it can recognize.
It has data editing function. Under normal circumstances, the scanner module outputs the original barcode value, but when using it, you need to add a prefix, suffix, or insert characters in the middle, or delete some bits. this barcode scanner module can meet these needs.
The feature and our advantage
1.Decode most of 1D barcodes and QR PDF417,Datamatrix,Aztec etc.2D barcodes.
2.According to customer needs, it can enable and disable bar codes, which can avoid misreading when two barcodes put together.
3.It can work under -20鈩?60鈩?and storage tem can up to -40鈩?80鈩?Less restricted by ambient temperature.
4.We can offer the FPC flat cable and 12pin female connector for free if client need.
5.We can provide the mother board for free, where has various of interface can be used.
Product parameters
Reading performanceImage SensorCMOS
Resolution300k pixels,648*488,30fps
Decoding capacitySupport paper and screen barcodes
2D: QR,PDF417,Data Matrix, Aztec, etc.
1D:  Code 39,Code11, Code 128, UPC-A, UPC-E,UPC-E1, EAN-8,EAN-13,EAN-128, UCC128, ISBN/ISSN, Code32,Code39 full ASCII, Code 93, Interleaved 2 of 5,GS1,Matrix 2 of 5, Industrial 2 of 5,UK/Plessey etc. all normal 1D
Scan AngleRotation360掳 ,tilt卤40掳 ,skew卤60掳
Trigger ModeManual, Continuous, Motion sensing, Host ,batch processing etc.
Typical DOFCode 128(6mil) 30-100mm  Code 128(20mil)50-250mm
QR code(5mil)30-60mm     QR code(20mil)40-220mm
Performance may be impacted by bar code quality and environmental conditions     
Mechanical and electricalInterfaceTTL232,USB by 12pin FFC flat cable
Working VoltageDC 3.3V
Current190mA(Max)  120mA(working)   48mA(standby)
Interface definitions
PIN 1NCfloating
PIN 2VCC3.3V power
PIN 3GNDground
PIN 4RXTTL  serial port  reception
PIN 5TXTTL  serial port  transmission
PIN 8NCfloating
PIN12TRIGTrigger signal
Packing and shipping
1.The scanner module will be safely placed in the foam partition.
2.According to the quantity, we will cut the paper packing box into the smallest packing to save the shipping cost
3.We will choose a safe, cheap and fast shipping method.
1.Can I have sample for test first ?
YES. Sample for test is ok. we have sample on stock.
2.Are you a manufacturer ?
Yes, we are a professional manufacturer for scan solution in IOT, Kiosk, access control and Retail industries.
3.Is it available for OEM/ODM ?
Yes, OEM/ODM are available, We can provide customized service according to customer requirement.
4.How about the quality?
Professional QC team. Pass ISO9001 quality certification, we have rigorous quality control process. Aging processing for each. All the products pass Drop test, CE,FCC,ROSH,etc.
5.What's the lead time?
For sample, it is typically within 3 days. For bulk order, it depends on quantity and model you order.
6.Can we have our Logo on the products?
YES. pls send your logo design. then we can print it on the products if the quantity is enoughOEM Barcode Scanner

Forum Jump:

Users browsing this thread: 1 Guest(s)